4CH Video Audio Vehicle Mobile DVR Surveillance Recording System 96 * 52 * 23MM

Cheap Mobile DVR 4CH Video/Audio Vehicle Surveillance Recording System with Remote Controller Encryption Features:

No-seam recording technology
Support SD card (is not included) up to 64GB, more convenient and vibration-proof than hard disk version.
Support four channel 4pin connector video and audio input, one channel AV connector video and audio output.
Support IR remote control. Special design of encrption to protect recording files.
Support wide range of voltage input from 8V to 36V.

Cheap Mobile DVR 4CH Video/Audio Vehicle Surveillance Recording System with Remote Controller Encryption Parameter:

Sunta Cheap Mobile DVR 4CH Video/Audio Vehicle Surveillance Recording System with Remote Controller Encryption

User’s Manual

Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state.

Ⅲ,Frequently Asked Questions
Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver's driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.
Question 6: about the camera connected to where?
A: The camera can be connected at the bottom of the rearview mirror, you can monitor the front direction, because the left and right front wheels are usually dead, rear wheel rearview mirror, the normal camera monitoring is not required.
Q 7: power input line device connected to where?
A: Red power cable ACC (ie car ignition point), black ground (or Ground). As signs Parking REC, red power cable can be connected to the car battery positive (Note: the 5th DIP switch to the top).
NOTE: Power Led, when energized, the lights lit; when the system enters standby mode, the power light flashes. Status status lights, video flashes, when not recording continuously. This product is the normal input voltage 9V ~ 36V (the parking monitor is 12.5V ~ 36V).

Package: 1pcs / Paper box.

Delivery Time: 3 working days after receiving your payment for your trial order. Bulk order depending on your order quantity.

Warranty:
All of our products have 15 months warranty of normal use. During this period, if the product has any quality problem ( not caused by humanbeing), we will repair it for free. Moreover, we offer a lifetime maintenance service .
Customize Service:
We have professional R&D team, if you have special requirements for the product, such as function, appearance etc. some professional requirements,pls feel free to contact us, we will offer you the most professional OEM&ODM service.
24/7 Online Service:
Any questions can contact us at any time,we will reply to you asap .
Fast Delivery Service:
Normally,we have the products in stock. Therefore,we can arrange delivery within 1 working day after receiving your payment. But for bulk order or some special festival, the shipment may takes a little longer.

The Payment Methods we can take:Western Union,Moneygram and T/T bank transfer ($15 bank charge).

1. What is your MOQ:
Usually, Our MOQ is 1pc or one set, welcome to order sample to test our quality and service.
2. How to get a sample?
1) choose the item you need and contact our sales for price, shipping and specifications details;
2) if you are agree with our offer, please send us your contact information to make Proforma Invoice;
3) after payment done, please send us bank copy or the payment control number, so that we can check the money and arrange sample for you as soon as possible;
4) The parcel will be shipped out within 24 hours after we collecting the money,tracking number will be sent to you after we ship out your sample.
3. Do you accept OEM/ODM ?
OEM/ODM is highly welcomed. and if you want OEM/ODM or customized service,pls feel free to contact our sales as below contact information.

CE FCC CERTIFICATIONS ______________________________________________