Panoramic Mobile Digital Video Recorder / Remote Mobile DVR 4 Channel

Panoramic Mobile Digital Video Recorder / Remote Mobile DVR 4 Channel

Mobile Digital Video Recorder Description

(1)Short press (less than 1 seconds) manual button switch the camera image in turn, if there is no image skip directly; long press (more than 1 second) automatic picture mode.

(2)In the trigger state, display the channel 3 picture, trigger after revocation, the image delay 3 seconds, and return to the multi screen mode.

(3) Up to 4 cameras, and automatically split the image screen.

(4)Each image positive / mirror function can be set separately.

Mobile Digital Video Recorder Technical parameters

The use of video recording:

1. Before using TF card format: TF card is inserted, power boot into POST mode (display

automatically turns off after five seconds into standby) by remote controlButton is on, press

ESC orStop recording (The default boot automatically start recording), press the "MENU"

button to enter the first page of the menu, press again to switch SETUP menu page, select

FORMAT, press the "REC or”,Press the left and right buttons to select EXECUTE,

press "ESC or” Formatting.

2. Modify the system date and time: Press the "MENU" button to enter the menu, press the switch to

the SETUP menu page, select DATE INPUT again, press "REC or”Key to enter the interface,

press the "left" or "right" key to switch to the SET, press "REC or"Button to enter the date and

time by switching the left and right, press" MENU "button to confirm and switch, press" REC

or"Button to confirm, press the" MENU "to exit.

3. Playback: Press "ESC or"Stop video playback again, press“”Key to enter the Playback

menu, press the "left" or "right" button to select the video file, press "REC or"Button to select

the playback, press the" MENU "button to fast forward.

P.S.Blue background is selected, the yellow background is not selected.

Functional memory statement:

Set the dial switch in different states, and then click on the extended line to touch the switch, while the host power, set memory function.

• Dial code switch 1 in the top, 2-4 below, set the boot screen for the automatic image "Tian" picture
• Dial code switch 2 on the top, 1,3-4 below, set the boot screen as "Tian" picture
• Dial code switch 3 on the top, 1-2,4 below, set the trigger screen as "Tian" picture (reserved function).
• The dial switch is below, restoring the default initial state (auto image "H" screen).