Shenzhen Sunta Technology Co., Limited
Accident is the largest waste, and safe is the greatest saving .
Add to Cart
High Resolution Vehicle Black Box DVR With 4CH Input 720×576 Overload Protection
Function description
Specification
Attentions
The screen and cameras would be no power while the LED on hand-key keep flickering, reason is as following:
When the screen keeps jumping
(1) Check if the camera is in poor contact
(2) Cancel the automatic image mode (press and hold the Quad to power on the host at the same time, the system will enable the fixed “Field” screen. Otherwise, press and hold CH1 to power on the host at the same time, enable the standard mode, automatic image mode.)
Technique parameters
| Name | Video system For Vehicle |
| Video system | PAL/NTSC(automatic identification, attention, connect the camera before power on) |
| Video parameters | Resolution 720×576, 25FPS, Vp-p:1.0V, impedance: 75Ω |
| AV/AU interface | 4CH Input(Aviation head interface),1 CH Output(Aviation head interface,) |
| Automatic screen mode | Wire control, High level trigger |
| Mirror | OFF/ON |
| POWER | 9W/18W |
| Work environment | Rated voltage DC 12V/24V , Working temperature 0℃-+55℃ |
| N.W | 340g |
| SIZE | 124*76*33mm |
Installation
Front Panel
(1)DC12V/24V Input,Connect power box, Red line take positive, the black line by negative
(2)Wire control interface, 1-4 corresponding to trigger channel 1-4.
(3)Connect to hand-key
(4)Connect to Remote extension cord
(5)Mirror switch, Each corresponding to a video channel.
Rear Panel
(7)-(10)Corresponding 1-4 channel, Each channel aviation head,
1. DC12V out, Red. 2. GND, Black. 3.Audio Input, Green. 4. Video Intput, Yellow
Picture 2 and 3pictures mode
Note the channel number, connect the corresponding channel